TorFloor 2® Standard - easy installation for timber floors.

• Combined floor deck and underfloor heating system for suspended floors
• TorFloor 2® System replaces the traditional floor deck with a complete dual layer system
• TorFloor 2® System is made up of 2 interlocking panels that fully encase the pipe – the Cover Panel is printed to show where the pipe channels are located, so to ensure the pipes cannot be breached when mechanically fixing the panels to joists
• Because the upper panel is foiled, the panel generates excellent heat output and a very fast warm up time
• TorFloor 2® System is tested to BS EN 1195
• In contrast to TorFloor®, no glue is needed to bond top panel to the lower panel – with TorFloor 2® these are mechanically fixed to speed up installation time and remove all wet processes.
• OMNIE TorFloor 2® has around 15% higher heat output compared to OMNIE TorFloor® and has a 40% higher heat output compared to un-foiled routed chipboard systems.
• TorFloor 2® is low temperature ready and designed with heat pumps in mind, this can reduce heating bills by up to 20% compared to aluminium spreader plate systems that also use heat pump as the heat source.
• TorFloor 2® makes use of a new patented AL-HEX® heat diffuser technology – this means that the foil diffuser (which is part of the upper panel) has more surface area in contact with the heating pipe, transferring more heat into the upper panel and minimising heat losses.

The multi-directional TorFloor 2® Deck Panels are laid directly onto the joists, replacing the need for the traditional floor and making installation easy. A second, foiled upper layer of 6mm woodboard covering layer wraps around the pipework and is then screwed to the TorFloor 2® Deck Panel to complete the floor.

Excellent Underfloor Heating Performance

The TorFloor 2® underfloor heating panels come with pre-installed aluminium diffusers which are bonded to the upper layer – this increases the heat output and energy efficiency compared to other systems. To further maximise heat output whilst also reducing the flow temperature, the pipe is designed to fit as close to the floor finish as possible. The TorFloor 2® system is optimised to work in conjunction with heat pumps.

Simple Installation

Manufactured from flooring grade chipboard, TorFloor 2® replaces the conventional floor deck. TorFloor 2® panels are laid on the joists, and the pipe is installed into the routed channels. The ends of each circuit can either drop into the joist space to be connected to a common 12mm flow & return or, if access permits, the system can be installed as a continuous system by feeding the 12mm pipe through the joist space.