TorFloor 2 – for Suspended Floors – OMNIE Underfloor Heating, Heat Pumps & Ventilation
for timber suspended floors
Perfect for heat pumps

Perfect for heat pumps

Multi-directional pipe channels

Multi-directional pipe channels

Floor & heating system in one

Floor & heating system in one

TorFloor 2 - evolves the market leading TorFloor with better performance and easier installation.

  • Combined floor deck and underfloor heating system for suspended floors
  • TorFloor 2 replaces the traditional floor deck with a complete system (no additional ply covering layers are needed)
  • TorFloor 2 is made up of 2 interlocking panels that wrap around the pipe – the upper panel is printed to show where the pipe channels are located, so to ensure the pipes cannot be breached when mechanically fixing the panels to joists
  • Because the upper panel is foiled, the panel generates excellent heat output and a very fast warm up time
  • TorFloor 2 is the only structural heated flooring panel tested to the latest standards (tested to BS EN 1195)
  • In contrast to TorFloor, no glue is needed to bond top panel to the lower panel – with TorFloor 2 these are mechanically fixed to speed up installation time and remove all wet processes.
  • OMNIE TorFloor 2 15% higher heat output compared to OMNIE Torfloor and has a 40% higher heat output compared to unfoiled routed chipboard systems.
  • TorFloor 2 is Low Temperature Ready and designed with heat pumps in mind, this can reduce heating bills by up to 20% compared to aluminium spreader plate systems that also use heat pump as the heat source.
  • TorFloor 2 makes use of a new patented Al-Hex heat diffuser technology – this means that the foil diffuser (which is part of the upper panel) has more surface area in contact with the heating pipe, transferring more heat into the upper panel and minimising heat losses.

The multi-directional TorFloor 2 base panels are laid directly onto the joists, replacing the need for the traditional floor deck and making installation easy. A second, foiled upper layer of 6mm chipboard covering layer wraps around the pipework and is then screwed to the base TorFloor 2 panel to complete the floor.

Excellent Underfloor Heating Performance

The TorFloor 2 underfloor heating panels come with pre-installed aluminium diffusers which are bonded to the upper layer – this increases the heat output and energy efficiency compared to other systems. To further maximise heat output whilst also reducing the flow temperature, the pipe is designed to fit as close to the floor finish as possible. The TorFloor 2 system is optimised to work in conjunction with heat pumps.

Simple Installation

Manufactured from flooring grade chipboard or plywood, TorFloor 2 replaces the conventional floor deck. TorFloor 2 panels are laid on the joists, and the pipe is installed into the pre-cut channels. The ends of each circuit can either drop into the joist space to be connected to a common 12mm flow & return or, if access permits, the system can be installed as a continuous system by feeding the 12mm pipe through the joist space.

This product will be available to order shortly. Please check with your project manager for more details.

TorFloor 2 – for Suspended Floors

Specifications

Panel Thickness (mm)
28
Length (mm)
2400
Width (mm)
600
Independently Tested
Tested to BS EN 1195
Suitable For
Suspended & batten timber floors
Pipe Centres (mm)
150
Heat Output (W/m2)
84
Acoustic Installations
Coming Soon
Weight With Water (kg/m2)
18.9
Compressive Strength (kPa)
N/A
Thermal Conductivity (W/mK)
0.35

Compare similar products

TorFloor – for Suspended Floors
View more + Compare
TorFloor – for Batten Floors
View more + Compare

Heat outputs

Heat outputs below are based on:

12mm PE-RT pipe at 150mm centres

Air Temperature = 20°C

With required structural layer (by others)

(0.15 m²K/W = 1.5 TOG)

Heat outputs are dependent on the water temperature, floor construction, system dimensioning, floor finish & design conditions. Contact us for advice and information.

Structural layer – Floor Finish Floor and Return Water Temperature (˚C)

55/48

50/43

45/38

40/33

Tile Finish (0.01m²K/W)

94 W/m²

84 W/m²

64 W/m²

49 W/m²

15mm Wood Finish (0.1m²K/W)

74 W/m²

62 W/m²

50 W/m²

38 W/m²

Carpet & Underlay (0.15 m²K/W)

67 W/m²

56 W/m²

45 W/m²

35 W/m²

How to specify

We recommend that you order our products directly through us so that you obtain the most appropriate system and performance specification for the project.

To get a quote please click here or call 01392 36 36 05

Information on product performance and suitability can be supplied by our projects team who are available via our technical support line – 01392 36 36 05. Alternatively please speak to your local business development manager or area sales manager who will happily talk you through our product range and also arrange for samples as you may require.

If you need information on complex constructions such as those with specific acoustic properties, or you have a specialist requirement that is not covered by our standard product range please call 01392 36 36 05.

Detailed installation instructions and a layout plan of the system is included in every system that gets dispatched to site. If you require any additional information at the time of installation we recommend you visit our resources library on our website.

A comprehensive support knowledgebase is also available that contains a wealth of information around installing and commissioning our systems. You can visit the knowledgebase online at support.omnie.co.uk