ScreedPlate 0
| Introduction |
|---|
The ScreedPlate 0 system comprises of a series of interlocking castellated sheets, that have been purposely designed to avoid using fixings & staples in the floor and to speed up the installation of underfloor heating systems. ScreedPlate 0 can be installed over any rigid insulation. The panel is designed to allow pipes to be installed at spacings as close as 50mm and at 45° & 90° bends, providing additional flexibility. |
|
| Specification |
|---|
OMNIE ScreedPlate 0 system using 16.5mm PE-RT pipe to DIN 4726 inserted into overlapping ScreedPlates laid above insulation. Expansion foam to be installed around the perimeter of the room. The system to be designed, installed and commissioned to BS1264. LAYFAST – Speed up installation time. This product uses a multidirectional pipe system. |
|
| Technical Details | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Panel Thickness Panel Dimensions Weight Pipe Centres Pipe Screed Existing Slab Heat Outputs
As a guide the heat outputs below are based on 16.5mm PE-RT pipe at 150mm centres with 65mm sand/cement screed laid over. Air Temperature = 20°C. (0.15 m²K/W = 1.5 TOG.) |
||||||||||||||||||||
|
